WASHINGTON - Scientists from the University of California Riverside (UCR) have manipulated ripples in graphene, which would enable the development of strain-based graphene electronics.
Graphene is nature’s thinnest elastic material and displays exceptional mechanical and electronic properties.
Its one-atom thickness, planar geometry, high current-carrying capacity and thermal conductivity make it ideally suited for further miniaturizing electronics through ultra-small devices and components for semiconductor circuits and computers.
But one of graphene’s intrinsic features is ripples, similar to those seen on plastic wrap tightly pulled over a clamped edge.
Induced by pre-existing strains in graphene, these ripples can strongly affect graphene’s electronic properties, and not always favorably.
If the ripples can be controlled, however, they can be used to advantage in nanoscale devices and electronics, opening up a new arena in graphene engineering: strain-based devices.
UC Riverside’s Chun Ning Lau and colleagues now report the first direct observation and controlled creation of one- and two-dimensional ripples in graphene sheets.
Using simple thermal manipulation, the researchers produced the ripples, and controlled their orientation, wavelength and amplitude.
“When the graphene sheets are stretched across a pair of parallel trenches, they spontaneously form nearly periodic ripples,” Lau explained.
“When these sheets are heated up, they actually contract, so the ripples disappear. When they are cooled down to room temperature, the ripples re-appear, with ridges at right angle to the edges of the trenches,” she added.
The unusual thermal contraction of graphene had been predicted theoretically, but Lau’s lab is the first to demonstrate and quantify the phenomenon experimentally.
Because graphene is both an excellent conductor and the thinnest elastic membrane, the ripples could have profound implications for graphene-based electronics.
“This is because graphene’s ability to conduct electricity is expected to vary with the local shape of the membrane,” Lau said.
“For instance, the ripples may produce effective magnetic fields that can be used to steer and manipulate electrons in a nanoscale device without an external magnet,” she added.
Lau’s experimental system, which involved a stage inside a scanning electron microscope (SEM) with a built-in heater, thermometer and several electrical feed-throughs, enabled her to image graphene while it was being heated and explore the interplay between graphene’s mechanical, thermal and electrical properties.
“Our result has important implications for controlling thermally induced stress in graphene electronics,” Lau said.
“Our ability to control and manipulate the ripples in graphene sheets represents the first step towards strain-based graphene engineering,” she added. (ANI)
Related News
A splash of graphene can improve battery materialsSeptember 23rd, 2009 WASHINGTON - In a new research, scientists have determined that a splash of graphene can improve battery materials. Researchers would like to develop lithium-ion batteries using titanium dioxide, an inexpensive material.
New graphite-based nano-material may herald next generation of electronic devicesSeptember 3rd, 2009 WASHINGTON - An international team of researchers has designed a new graphite-based, magnetic nano-material that acts as a semiconductor and could help material scientists create the next generation of electronic devices like microchips. The nano-material was designed by a team of researchers from Virginia Commonwealth University (VCU); Peking University in Beijing, China; the Chinese Academy of Science in Shanghai, China; and Tohoku University in Sedai, Japan.
Scientists use camera flash to turn insulating material into conductorAugust 13th, 2009 WASHINGTON - Can camera flash actually turn an insulating material into a conductor? Yes, if Northwestern University researchers are to be believed. Lead researcher Jiaxing Huang, assistant professor of materials science and engineering at Northwestern's McCormick School of Engineering and Applied Science have found a novel way of turning graphite oxide - a low-cost insulator made by oxidizing graphite powder-into graphene, a material that conducts electricity.
Graphane may help make tiny strips of graphene needed for electronic circuitsAugust 1st, 2009 WASHINGTON - In a new research, scientists have explained how their discovery of graphane could make it easier for the production of tiny strips of graphene needed for electronic circuits. Graphane was discovered by Kostya Novoselov - a condensed-matter physicist from the Manchester University group.
Bumpy drives may soon be historyJuly 8th, 2009 WASHINGTON - Bumpy drives may soon be history, with an international team of researchers gaining fresh insights into the ripples on loose surfaces-sand or gravel or snow-that make driving a very shaky experience. The research team including experts from Canada, France, and the United Kingdom have basically recreated this "washboard" phenomenon in the lab with surprising results.
Peeling stickers to pave way for stretchable electronicsJune 16th, 2009 Washington, June 16 (ANI): Focussing on stickers peeling from windows, scientists are hoping to develop a new way to precisely control the fabrication of stretchable electronics-electronic devices embedded into clothing, surgical gloves, electronic paper or other flexible materials. Developing such stretchable electronics have proved difficult because the electrical wiring tends to be damaged as the material twists.
Bilayer graphene to pave way for tunable electronic devicesJune 11th, 2009 LONDON - Researchers at the University of California, Berkeley, have shown that a form of carbon called graphene has an electronic structure that can be controlled by an electrical field, a finding that may pave the way for a host of tunable electronic and photonic devices-such as transistors, LEDs and lasers. Principal author Feng Wang, UC Berkeley assistant professor of physics, claims that this is the first ever demonstration that bilayer graphene exhibits an electric field-induced, broadly tunable bandgap.
Graphene may replace copper at nanoscale widths in futureJune 5th, 2009 WASHINGTON - In a new research, scientists have experimentally demonstrated the advantages that graphene may have over copper for interconnects in future generations of integrated circuits. Researchers at the Georgia Institute of Technology, US, report detailed analysis of resistivity in graphene nanoribbon interconnects as narrow as 18 nanometers.
Enabling graphene-based technology via chemical functionalizationMay 18th, 2009 WASHINGTON - A team of scientists has identified conditions for enabling graphene-based technology through chemical functionalization. Graphene is an atomically thin sheet of carbon that has attracted significant attention due to its potential use in high-performance electronics, sensors and alternative energy devices such as solar cells.
Scientists reveal secrets of graphene's extraordinary propertiesMay 15th, 2009 WASHINGTON - In a new analysis, scientists have directly measured the unusual energy spectrum of graphene, which adds new detail to help explain the extraordinary properties of the material. The analysis was done by researchers from the Georgia Institute of Technology and the National Institute of Standards and Technology (NIST).
Large-area graphene on copper may lead to faster computers, electronicsMay 8th, 2009 WASHINGTON - The development of large-area graphene using copper may pave the way for faster computers and electronics, according to scientists and engineers at The University of Texas at Austin. Graphene, an atom-thick layer of carbon atoms bonded to one another in a "chickenwire" arrangement of hexagons, holds great potential for nanoelectronics, including memory, logic, analog, opto-electronic devices and potentially many others.
Simple process makes thin nanoribbons for conductive productsApril 16th, 2009 WASHINGTON - Scientists at Rice University, US, have uncovered a room-temperature chemical process that splits carbon nanotubes to make flat nanoribbons, which can be used to create basic elements for aircraft, flat-screen TVs, electronics and other conductive products. The technique makes it possible to produce the ultrathin ribbons in bulk quantities.
New blockbuster: Watch a carbon atom make a moveApril 1st, 2009 WASHINGTON - Researchers working with the world's most powerful electron microscope have filmed carbon atoms in live motion for the first time, as the atoms repositioned themselves around the edge of a hole punched into a graphene sheet. Viewers of the 'movie' that promises to become a blockbuster - at least over the Internet - observed chemical bonds breaking and forming as the suddenly volatile atoms are driven to find a stable configuration.
Graphene based chips could pave way for faster data transferMarch 24th, 2009 WASHINGTON - Using a material called graphene, scientists at Massachusetts Institute of Technology (MIT) have created new superfast chips which can lead to cell phones and other communications systems that can transmit data much faster. Graphene is a form of pure carbon that was first identified in 2004.
MIT findings to help design superfast microchipMarch 24th, 2009 WASHINGTON - Researchers have built a microchip from graphene, a form of pure carbon, that can operate at much higher speeds than existing silicon chips. This will enable faster data transmission in mobile phones and computers.
Loading ...