BSNL DataOne provides software for connecting to Linux. dataone에 BSNL 리눅스에 연결하는 소프트웨어를 제공합니다. However I found that you can setup much easier and without using their custom software. 그러나 나는 설치 프로그램을 찾을 수있는 그들의 맞춤 소프트웨어를 사용하지 않고도이 훨씬 용이하고있습니다.

First you must know that the DSL modem from BSNL can be directly setup to connect automatically, provide firewall, DHCP and even NAT to allow multiple computers to connect to the internet. 모뎀을 처음부터 알고 있어야합니다에 BSNL의 DSL 모뎀을 직접 설치 프로그램을 연결할 수있습니다 자동으로 제공 방화벽, 냇 dhcp 심지어는 인터넷에 연결하는 데 여러 대의 컴퓨터를 허용합니다. So effectively you can have several computers connected to a hub / switch to which the DSL modem connects and then all these computers will be able to connect to the internet by setting the DSL modem as DHCP server in their settings. 너무을 효과적으로 여러 대의 컴퓨터가 연결되어있는하실 수있습니다 허브 / 스위치가되는 DSL 모뎀 모뎀에 연결하고 이러한 모든 컴퓨터는 인터넷에 연결할 수있습니다 dhcp 서버에서 모뎀을 설정하여 DSL 모뎀의 설정을합니다. However in my experience, as the connection is often unreliable, it is better to use software on your computer to establish the link. 그러나, 제 경험으로는 신뢰할 수없는로 연결이 자주 사용하는 것이 좋습니다 컴퓨터에 소프트웨어를 사용의 링크를 수립합니다. It allows more control over the connection and 그것의 연결을보다 효율적으로 제어할 수 faster reconnects after disconnection 종료 후 다시 빠르게 with little changes to configuration. 작은 변경 사항을 구성합니다. The solution is simple. 해결책은 간단합니다.

Run adsl-setup . adsl - 설치 프로그램을 실행합니다. Most likely it is already installed on your system. 대부분의 사용자 시스템에 이미 설치되어있는 것은합니다. Otherwise you can also install it on yum enabled distributions like Fedora Core simply by: 다른 배포판을 설치할 수도있습니다처럼 활성화에 중절모 중핵하기만하면 최고의 맛 :
yum install rp-pppoe 최고의 맛 rp - pppoe를 설치
It asks questions like your login name and password (provided by BSNL), your ethernet interface (choose the default provided - eth0; works for most cases) etc. After the setup you should preferably reboot (or restart the network - service network restart ) and you will find your DSL connection up and running. 귀하의 로그인 이름과 암호를 묻는 질문에 그것처럼 (제공한에 BSNL), 귀하의 이더넷 인터페이스 (선택의 기본 제공 - eth0;은 대부분의 경우) 등 다음에 재부 팅되도록 설정해야합니다 (또는 네트워크를 다시 시작합니다 - 서비스 네트워크를 다시 시작) 그리고 당신은 찾을 수 DSL 모뎀 연결을 설치하고 실행합니다.

You can also manually bring up DSL connection by: 또한 DSL 모뎀 연결을 수동으로 제기하실 수있습니다 :
ifup ppp0 ifup ppp0

You can bring it down by: 아래쪽에 가져다하실 수있습니다 :
ifdown ppp0 ifdown ppp0

Note: Unless you have multiple DSL connections, ppp0 is a safe bet. 참고 사항 :이 여러 개있는 경우 DSL 모뎀 연결, ppp0은 안전한 베팅합니다.