eBox platform provides a mini-debian installation along with its modules to allow you to provide and manage network services on your corporate network. ebox 플랫폼과 함께 제공하는 미니 - 데비안 설치 및 관리하는 모듈을 사용하면 네트워크 서비스를 제공하여 기업 네트워크를합니다. The key capabilities includes support for multiple external network interfaces with load balancing, traffic shaping, transparent proxy, firewall, content filters, DNS (domain name server), NTP (time server), mail server, Jabber Instant Messaging server, SAMBA for file sharing, DHCP and more. 핵심 기능을 여러 개의 외부 네트워크 인터페이스를 지원을 포함로드 밸런싱, 트래픽 쉐이핑, 투명 프록시, 방화벽, 콘텐츠 필터, dns (도메인 이름 서버), ntp (시간 서버), 메일 서버, 재버 인스턴트 메시징 서버, 삼바 파일 공유를 위해 , dhcp, 더 많은합니다. In short it promise to be a one-stop solution for all network services needs for small businesses. 요컨대 그것은 한 - 정지 솔루션에 대한 약속을 모두 소규모 기업을위한 네트워크 서비스를 요구합니다. Particularly I was interested in load balancing between multiple ADSL providers and traffic shaping capabilities. 특히 관심이 전로드 밸런싱과 트래픽 쉐이핑 기능을 제공 업체 사이에 여러 개의 adsl합니다. Here are my experiences with eBox platform. 여기에 ebox 플랫폼은 나의 경험을합니다.

eBox allows you to test it from a live CD which I opted to do for simplicity. ebox을 사용하면 실시간 기능을 테스트해볼부터 나는 할 코드를 단순화하기 게재합니다. The machine booted quickly with the Live CD and I was presented with a Firefox browser in maximized mode. 이 기계를 부팅 cd를 신속하게 실시간으로 전 firefox 브라우저를 최대화 모드를 발표합니다. The default password is ebox which allowed me to login to system. ebox의 기본 비밀 번호는 시스템에 로그인할 수있게 허락 해준합니다.

Initially I started with two interfaces - a LAN connection to my corporate network which provides transparent internet access using a gateway and a USB ADSL connection from VSNL / Tata Indicom modem. 처음에 나는 두 개의 인터페이스로 시작 - 내 기업 네트워크 근거리 통신망 연결을 투명하게 인터넷 액세스를 제공하는 usb adsl 연결을 사용하는 게이트웨이 및 vsnl / 타타 Indicom를 모뎀을합니다. I expected the system to recognize both the interfaces and specify the IP addresses etc. Unfortunately it recognized only the LAN interface and ignore the USB. 내 예상의 시스템을 인식 등 모두에서 인터페이스 및 주소를 지정합니다 불행히도 우리 근거리 통신망 인터페이스를 무시하고 usb만을 인정합니다.

I then used the alternative LAN cable for VSNL (Broadband provider) with an additional LAN card. 그런 다음 대안 랜 케이블을 사용하여 vsnl (광대역 공급자)과 랜 카드를 추가합니다. It did recognize both the interfaces now but I was unable to successfully configure either of the interfaces & gateway after several attempts. 현재를 인식 인터페이스를 둘 다 그렇게하지 못했습니다하지만 전을 성공적으로 인터페이스를 구성 및 게이트웨이 다음 중 하나에 여러 번 시도합니다. Let me clarify few points here. 여기에 몇 점을 명확히 제가합니다. First of all I am very well conversant with setting up IP addresses & gateway. 첫 번째의 모든 나는 아주 잘 정통 및 게이트웨이 주소를 설정합니다. All the interfaces are in working order and are tested to be properly working. 인터페이스가와 함께 작업의 모든 테스트를 주문하고 제대로 작동합니다. And yet I was unable to use either or both of them to configure for outbound connections. 난 아직은 하나 또는 두 개 모두를 사용할 수없습니다에 대한 아웃 바운드 연결을 구성합니다. This was very frustrating to say the least. 이것은 매우 실망스러운 할 말이있는 최소한합니다.

For some reason eBox doesn’t allow me access to the console / terminal. 어떤 이유로 내게 접근을 허용하지 않습니다 ebox 콘솔 / 터미널합니다. I tried Ctril-Alt-F1 through Ctril-Alt-F12 without success. ctril - alt - f1 보았습니다 ctril - alt - F12 키를을 통해 성공을하지 않고있습니다. In fact after trying it I was unable to return back to the GUI. 사실, 난하지 못했습니다 시도한 후 그래픽 사용자 인터페이스로 돌아갑니다.

Add to it the prospect that you have to dedicate a machine for eBox makes it an unattractive proposal for me. 장바구니에 그것 전망 기계를 위해 헌신해야한다는 거죠 ebox이 나를 위해 그것을 매력없는 제안을합니다.
My first foray into eBox was a disaster to say the least. 첫 번째 진출 재해로 말할 ebox는 최소한합니다.

I have decided to stick to Fedora and use Anastosov’s patches to enable proper load balancing and transparent fail-over. 나는 중절모를 사용하기로 결정에 충실 anastosov의 패치를 적절한로드 균형 조정을 활성화하고 투명한 실패 - 이상합니다. At least I know I can make it work. 적어도 난 알아요 작동시킬 수있습니다. Any better suggestions welcome. 더 나은 제안을 환영합니다.